Panasonic hdc - sd90 user manual

C Displayed only during the Manual Mode. The Touch Menu will disappear when no function is performed for a specific period of time during Recording Mode. To display it again, touch. When the unit is turned on for the first time, a message asking you to set the date and time will appear. Perform the World time setting by touching the screen. If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this unit.

Leave the unit as it is for approx. The battery is still being recharged even if the unit is off. If the subject is backlit, it will become dark in the recording. However the image recorded is the same as a normal recording. The card and built-in memory can be selected separately to record motion pictures or still pictures.

R 1h20m. To display it again, touch the screen. Each time the unit is put into recording pause, the counter display will be reset to 0h00m00s. C Approximate remaining recordable time. Recording will continue. In such a case, play back on this unit instead. B Focus area area inside brackets.

Touch Shutter: l When there is a contrasting object ahead or behind the subject in the focus area, the subject may not be focused. If so, move the contrasting object out of the focus area. Press the button fully press to the bottom to take the picture. If the unit is turned off or the mode switch operated, the recordable time remaining may lengthen. The following modes appropriate for the condition are set just by pointing the unit to what you want to record.

In the Portrait mode, a subject that is bigger and close to center of the screen will be surrounded by an orange frame. Depending on the brightness of the subject etc. If so, manually adjust these settings. Record pictures in the Manual Focus Mode. Operate the volume lever to adjust the speaker volume during motion picture playback. Not all JPEG formatted files will be played back. After touching , touching the submenus and items will cause function descriptions and settings confirmation messages to appear.

It is possible to display and record the time at the travel destination by selecting your home region and the travel destination. If the home region has already been set once, execute the menu operation for Step 1. The travel destination time and time difference from the home region time are set forward by one hour.

C The local time at the selected travel destination. D The time difference between the travel destination and the home region. When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life. The unit is put into recording pause approx. This unit is put into recording pause approx.

The status indicator A lights red and the unit is put. When an error occurs. Check the sentence displayed on the screen. This makes it easier to view the LCD monitor in bright places including outdoors. Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Do not expose the unit to vibrations or shock. Do not format an SD card using any other equipment such as a PC. The card may not be used on this unit.

Therefore, the indicated value of the capacity appears to be smaller. The used space and remaining recordable time of the SD card and built-in memory can be checked.

Perform the touch screen calibration if a different object to the one touched is selected. This item is used to start the unit demonstration. Only when the mode is at the or position. If any operation takes place, the demonstration is canceled. However if no operations take place for approx. This item is used to start the Optical Image Stabilizer demo.

Only when the mode is at the position. Touch [O. DEMO], the demonstration automatically starts. When you touch [EXIT], the demonstration will be canceled. Touch Zoom: l The zoom speed will be faster in the order of zoom lever, zoom button icon, and then touch zoom. In Still Picture Recording Mode, the still picture can be recorded with a zoom ratio of a maximum of 50k without degrading the picture quality.

When you set the picture size to 0. When returning the zoom lever to the original position, move it quietly. Use the image stabilizer to reduce the effects of shake during recording. This unit is equipped with Hybrid Optical Image Stabilizer. Hybrid Optical Image Stabilizer is a hybrid of optical and electrical image stabilizer.

When [OFF], is displayed. When set to [ON], you can further improve image stabilization for recording while walking, or holding the unit and recording a distant subject with zoom. The function works when the button is pressed. We recommend using this mode when you are recording yourself or recording with a tripod in Still Picture Recording Mode.

You can record using convenient functions just by the easy operation of touching the screen. Optical Image Stabilizer Lock is canceled by releasing the finger touching. C Zoom magnification position. To display it again, touch the screen while touch zoom bar is displayed. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password?

Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Model No.

Serial No. Panasonic Canada Inc. The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable. Marking sign is located on bottom of the unit. This manual was printed with soy based ink. A nickel metal hydride battery that is recyclable powers the product you have purchased. The model number and serial number of this product can be found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for future reference. Use numbers indicated in parentheses when asking for replacement parts. For the U. Zoom OFF] It allows you to record only to SD card from built-in memory. Color technology. Sounds near the front of the unit are recorded more clearly if you zoom in close-up and surrounding sounds are recorded more realistically if you zoom out wide angle. Adjust by outputting to a TV while adjusting the quality of the image.

Priority is given to the number of still pictures recorded. Still pictures are recorded in normal picture quality. Use this function to record an object with fast movement. Page White Balance White balance Automatic white balance function may not reproduce natural colors depending on the scenes or lighting conditions. If so, you can adjust the white balance manually. Iris: Adjust it when the screen is too bright or too dark. Touch to adjust settings. To view 3D video, a television that supports 3D is required.

Touch [EXIT] to end the adjustment. Page Advanced Playback Advanced Playback Playback Operations Motion picture playback using operation icon For details on the basic playback operations, refer to page Playback operation Playback display Operating steps Touch 5 during playback to fast forward. Touch 6 to rewind. Scene can be played back from any midway point of the scene you wish to see. Page Resuming The Previous Playback Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped.

Touch the date select icon. Page Highlight Playback Highlight Playback Part that was recognized as clearly recorded is extracted from a long recording, and it can be played back in a short time with effects and music added. To complete editing: Touch [Return]. Page Deleting Personal Information Deleting personal information Deletes face recognition information from scenes in which faces were recognized.

Combining of the relay scene cannot be performed if the available space on the SD card is less than the volume of the relayed scene in the built-in memory. Image quality may vary with the connected terminals. Page 98 TV. Refer to the operating instructions of the TV for details. Refer to the following support site for information about Panasonic TVs with an SD card slot for playing back your pictures.

If the images are not output on the TV when the setting is [AUTO], switch to the method [p], [i] or [p] which enables the images to be displayed on your TV. Not all operations are possible. Refer to the operating instructions of the TV for the operations that support on the TV. Page 3D Video Playback Advanced Playback 3D video playback Connect the unit to a 3D compatible television and play back scenes recorded in 3D to enjoy life-like and powerful 3D video.

Even if scenes are recorded on the same day, the unit will display the date separately when switching between 2D and 3D recordings. Page Touch desired items following the screen display. Copy to PC to make a backup. In some cases the disc may get stuck in the device. Also, do not shake this unit or the DVD burner. Please be aware that if a disc is formatted, then all the data recorded on the disc will be erased. For further details, see the operating instructions of your recorder. Operation is not guaranteed with any other USB cables.

Change the video input on the video device and TV that this unit is connected to. The video is recorded unaltered in side-by-side format.